Download
FreeISP Install is a Windows app that puts FreeISP OS on a supported router for the first time. It finds the router, checks the exact model, downloads the signed FreeISP OS image, installs it and confirms the router started. FreeISP Desk comes in the same download, for managing the router afterwards.
FreeISP Install for Windows Preview
- Windows 10 or 11, 64-bit. Uses .NET Framework 4.8 and the Microsoft Edge WebView2 Runtime (both included with current Windows).
- One app: FreeISP Install with FreeISP Desk included. No panel account needed.
Before you start
- A Windows PC and an Ethernet cable from the PC to the router. Keep the router powered on.
- Internet on the PC to download the image. Use Wi-Fi or a second adapter for internet, so the router cable stays separate. No internet at the router site? Prepare an offline kit first.
- The router's administrator password. It stays on your PC and is never saved in reports.
- Installing replaces the router's firmware and resets its settings. The router is offline for about 10 minutes, so do not install on a router that is serving customers.
Already running FreeISP OS? Do not use FreeISP Install. Update from the router itself (System › Firmware › Check for Updates) or from FreeISP Desk. Settings, users and files are kept.
Supported routers
The app reads the router's exact model and firmware version and refuses anything it does not support.
| Router | What FreeISP Install does |
|---|---|
| RouterBOARD 951Ui-2HnD | Automatic installation. Tested on hardware. Follow the steps below. |
| RouterBOARD 951G-2HnD | Automatic installation. The app checks the router’s flash before it installs. |
| Cudy WR1300 V3 label version 3.0 (e.g. EU3.0) only | Automatic installation. Tested on hardware. Connect the PC to a LAN port, select the router and enter the Cudy admin password. Follow the Cudy installation guide. |
| Xiaomi Mi Router 4A 100M International V2 label R4AC, factory firmware 3.0.129 | Sign in and prepare only. The app checks the router and downloads its image, but installation stays locked in this version. To have FreeISP OS installed, contact your account manager (see the Xiaomi guide). |
| 64-bit x86 PCs, servers and VMs | Downloads the verified disk image for you to write to a VM or a dedicated disk. The app never writes to a disk itself. |
| Xiaomi AX3000T, CMCC RAX3000M / RAX3000Me, Cudy WR3000, Qihoo 360 T7, Xiaomi Mi Router 4A Gigabit, Qihoo 360 T6M | Coming soon |
Install on RouterBOARD 951Ui-2HnD
About 10 to 15 minutes. The app moves through nine steps by itself and tells you when to move the cable.
- Download and open the app. Download FreeISP Install above and open the downloaded .exe. Everything it needs is included and prepared automatically; there is no folder to extract or second app to download.
- If Windows shows Windows protected your PC, click More info › Run anyway. The preview is not code-signed yet.
- Connect the cable. Plug the PC into ether2 (any of ether2–ether5 works) and leave the router powered on. Do not use ether1 yet.
- Select the router. The app looks for routers automatically. Pick yours under Routers on your network. Not listed? Click Rescan, or enter its address under Connection options.
- Enter the administrator password. Leave Router username blank to use the default administrator account, or type yours if you changed it.
- Click Install FreeISP. The app signs in, checks the exact model, downloads the signed FreeISP OS image and verifies it. It sets your PC's Ethernet address automatically for the installation and restores your settings afterwards.
- Move the cable when the app asks. The progress panel shows each instruction with a timer:
- Move the PC cable to ether1: do it within 45 seconds. The router restarts into network boot by itself.
- Move the PC cable to ether2: move it back.
- If the app asks you to unplug and reconnect power, do it before the timer ends.
- Never press the Reset button. If the app asks for the ether1 MAC address, read it from the router's label.
- Wait for Starting FreeISP (step 9). This usually takes about 4 minutes. Keep the power on and the cable in ether2. The app checks the router's model, MAC address, installed version and management page, and finishes as soon as they pass.
- Done. When the app shows Installation complete — 9 of 9 steps complete, the router is running FreeISP OS at
http://192.168.80.1(releases before 1.0.8-rc26:http://192.168.0.1). Click Open FreeISP Desk to manage it, then add the router to your billing panel under Network › Routers.
Do not unplug the power or start the install again while it is running. A slow reply is not a failure: the app keeps checking and tells you the real result. If it says the router is taking longer than expected, keep waiting.
Troubleshooting
- The router is not found or does not answer. Set the PC's Ethernet adapter to get its address automatically:
press Windows+R, type
ncpa.cpland press Enter. Right-click the Ethernet adapter connected to the router › Properties › Internet Protocol Version 4 (TCP/IPv4) › Properties. Choose Obtain an IP address automatically and Obtain DNS server address automatically, click OK, wait a few seconds, then click Rescan. Leave Wi-Fi as it is. - Still no answer. Check the router's power and use a numbered LAN port (ether2–ether5), not the internet port.
- Wrong password. The app says so and lets you type it again. It never retries a password by itself.
- No reply after installation. The app tries the other LAN port and renews the PC's address automatically. If it asks, move the cable to another numbered LAN port.
- RB951 will not boot or Netinstall cannot find its MAC? Follow the RB951 recovery guide for ether1, Windows settings and the physical reset-button sequence. Recovery does not require a router login.
- Need help? Open Local reports and click Export for support. This makes a ZIP without passwords. Send it to your account manager yourself; nothing is sent automatically.
More options
Offline installation kit
While you have internet, choose the router model under Connection options and click Prepare offline kit. The app downloads and verifies everything onto the PC, checks it again each time it is used, and can then install at a site without internet. No router is needed to prepare it.
Backup before installing
Backups are off by default. To keep a full copy of the router's storage first (about 132 MB), open Advanced & recovery and tick Save full raw storage backup before you click Install. The copy is saved on the PC.
Return to the original firmware
For the RouterBOARD 951Ui-2HnD, Advanced & recovery › Restore original firmware downloads and verifies the manufacturer's official recovery tools and opens the recovery utility, where you select the router and start the restore. This erases the router's settings and files. It needs ether1 and a Windows administrator prompt.
Release channel
Stable is selected by default and recommended. Choose Development under Connection options only for testing. Every image is checked against the FreeISP release key and its SHA256 before use; the app refuses an image that fails either check.
Command line
For technical teams, freeispinstall.exe in the same folder does the same work from a Command Prompt. It asks for the router password without showing it; never put a password on the command line.
freeispinstall status freeispinstall discover freeispinstall download --model rb951ui-2hnd freeispinstall prepare --router 192.168.88.1 freeispinstall install --router 192.168.88.1 --confirm freeispinstall export-support REPORT_FOLDER support-report.zip