The FreeISP Install app puts FreeISP OS on a new Cudy WR1300 V3 for you. You connect a cable, type the Cudy password and click Install. It takes about 10 to 15 minutes and the router restarts twice.
Before you start
- Check the label. Turn the router over: it must say WR1300 V3.0 (for example EU3.0). The app refuses version 2.0 and other models without changing anything.
- Check the power adapter. Use a 12 V adapter of at least 1 A. A weaker adapter can make the router switch off under heavy Wi-Fi traffic.
- Know the Cudy admin password. This is the password of the Cudy web page at
http://192.168.10.1. If the router is new and that page asks you to create a password, do that first. - Get the app. You need a Windows 10 or 11 PC and an Ethernet cable. Download FreeISP Install from the FreeISP Install page and open the downloaded .exe. If Windows shows Windows protected your PC, click More info › Run anyway.
Install FreeISP OS
- Connect the cable. Plug the PC into one of the Cudy’s LAN ports, not the WAN port. Keep the router powered on.
- Open FreeISP Install. Click Yes when Windows asks for administrator access: the app needs it to set the PC’s Ethernet address during the installation.
- Select the router. Pick the Cudy from the routers the app finds. Not listed? Click Rescan, or enter
192.168.10.1under Connection options. - Enter the Cudy admin password and click Install FreeISP. The app then works on its own:
- It signs in and checks that the router is a WR1300 V3.
- It downloads and verifies the images.
- It sets the PC’s network address by itself.
- It loads Cudy’s own signed intermediate firmware, and the router restarts.
- It saves this router’s factory and bootloader data on the PC.
- It installs FreeISP OS, and the router restarts again.
- It checks that FreeISP OS started, then puts the PC’s network settings back.
- Wait for the result. The installation is finished when the app shows FreeISP installation and the matching Cudy were verified.
Do not unplug the power or the cable, and do not start again, while it is running. A slow reply is not a failure: the app keeps checking and tells you the real result.
After the installation
- Sign in. Open
http://192.168.80.1in a browser, or click Open FreeISP Desk in the app. Sign in with the FreeISP factory login and change the password straight away. - Connect the internet. Plug the internet line into the WAN port and set the connection in Quick Set.
- Connect it to your billing panel. Add the router under Network › Routers and run the installation script as you would for any router.
- Keep it up to date. New versions install from the router itself: open System › Firmware, click Check for Updates, then Download & Install. Settings, users and Hotspot pages are kept.
If something goes wrong
- The router is not found. Check that the cable is in a LAN port. Set the PC’s Ethernet adapter to get its address automatically: press Windows+R, type
ncpa.cpland press Enter. Right-click the Ethernet adapter › Properties › Internet Protocol Version 4 (TCP/IPv4) › Properties, choose Obtain an IP address automatically, click OK, then click Rescan. - Wrong password. The app says so and lets you type it again. It never retries a password by itself.
- The installation stopped partway. Do not power the router off and do not start from the beginning. Open the app again: if the router is already on the intermediate firmware, it shows Continue Cudy installation.
- Need help? Open Local reports and click Export for support. This makes a ZIP without passwords. Send it to your account manager; nothing is sent automatically.
Going back to the Cudy firmware
- Start the restore. In FreeISP Install, select the router and click Restore original firmware. The app saves the FreeISP settings and the router’s factory data on the PC first. The restore erases the router’s FreeISP settings.
- Use the Reset button when asked. Keep the LAN cable connected. Power the Cudy off, hold Reset, then power it on. Release Reset when its lights flash rapidly or the transfer starts.
- Wait. The app checks that the official Cudy firmware (2.5.41) is running again at
http://192.168.10.1.