{
  "channel": "stable",
  "releases": [
    {
      "version": "1.0.8-rc40",
      "date": "2026-11-19",
      "summary": "FreeISP OS 1.0.8-rc40 keeps the router reachable after a LAN address change, removes safe mode and fixes problems found in rc38.",
      "notes": [
        "LAN address changes (Quick Set and the other pages): the old address keeps working for one DHCP lease time plus a minute (31 minutes with the default 30-minute lease). Computers and phones still on the old range keep their internet and can open the router at its new address. Each device moves to the new range when it renews its address; unplugging and replugging a computer's network cable, or reconnecting its WiFi, moves it at once. Before, the router seemed unreachable until each device's lease ran out.",
        "Power cuts and restarts: the router no longer goes into safe mode, however many times it restarts or loses power. Before, three unexpected restarts within 30 minutes switched off the Hotspot, the VPN and other services until someone rebooted the router from its web page. A router that is in safe mode leaves it when it installs this update.",
        "Firewall: NAT rules can use your own chains (jump to a chain and return from it). Enabling such rules no longer fails with \"Applying the change failed and was rolled back\".",
        "Firewall: a destination NAT rule for a range of ports without To Ports now changes only the address, so every connection keeps its own port.",
        "DHCP Server: networks can be removed again from the page, the Terminal and the panel, and adding a network, lease or option now returns the new entry's ID as expected."
      ]
    },
    {
      "version": "1.0.8-rc38",
      "date": "2026-11-18",
      "summary": "FreeISP OS 1.0.8-rc38 extends the firewall, scripting and network pages, on top of everything in rc37.",
      "notes": [
        "Firewall: NAT rules can use address ranges and whole-network mapping, and can keep each client on the same outside address. Filter, NAT, Mangle and Raw rules gain more matches (per-connection load sharing, packet and connection marks, TOS, TTL, ICMP, byte counts, address types, either-port and IPv4 options) and packet-rate limits.",
        "Firewall: rules can match secure websites by name (TLS host) on RB951, Cudy, Xiaomi and PC routers.",
        "Scripts and Scheduler: more script commands work as expected, multi-line scripts can be pasted into the Terminal, and schedules can run at boot, on an interval or on chosen weekdays.",
        "DHCP: clients now receive the correct subnet mask for their network; existing settings are updated automatically.",
        "IP Addresses, Hotspot, PPP and Interfaces: address ordering and disabled entries, remembered Hotspot logins, PPP profile export, and interface statistics now behave as expected in the page and the Terminal.",
        "Load Balance: overlapping networks are detected before a line is added, and a line whose setup was interrupted is completed or rolled back safely.",
        "Firmware and Load Balance pages: checkbox labels are no longer cut off."
      ]
    },
    {
      "version": "1.0.8-rc37",
      "date": "2026-11-12",
      "summary": "FreeISP OS 1.0.8-rc37 completes the move of the web interface to its FreeISP address, on top of everything in rc36.",
      "notes": [
        "The web interface now opens at http://<router address>/freeisp/os/. Opening the router address alone takes you there, and an old bookmark or a page still open on the old address (such as the Firmware page after an update) moves to the same page there, still logged in.",
        "Reset Configuration now brings the router back with its factory settings at 192.168.80.1. Keeping the current LAN address is still available as an option in the reset window.",
        "Access points cabled to Hotspot ports get an address again on their own after a power cut: once the Hotspot is ready, the router restarts those ports for a moment so the access points ask again (RB951 routers).",
        "A phone that once got a LAN address no longer keeps it while on the Hotspot: at its next renewal it is moved to the Hotspot network.",
        "Load Balance: any port can now be chosen for a new Internet line; the router takes it out of its bridge for you (never the port you are connected through).",
        "The Log keeps days of history instead of about two hours: routine background downloads are no longer written to it.",
        "PPPoE: a damaged disconnect message can no longer keep the router busy for half a minute, management keeps working with many hundreds of sessions, and changing a plan's speed with many users online no longer restarts PPPoE.",
        "Changing queues no longer removes the speed limits of PPPoE, Hotspot or load balancing.",
        "The management connection used by billing panels stays available when many connections open at once.",
        "Security: accounts with limited rights can no longer gain full control through the web Terminal or web actions.",
        "Terminal: almost every page in the menu can now be managed from the Terminal, with the same checks as the page.",
        "Firmware updates are started in a safer way."
      ]
    },
    {
      "version": "1.0.8-rc36",
      "date": "2026-11-12",
      "summary": "FreeISP OS 1.0.8-rc36 gives the web interface its own FreeISP address and makes Reset Configuration return to the factory settings, on top of everything in rc35.",
      "notes": [
        "The web interface now opens at http://<router address>/freeisp/os/. Opening the router address alone still takes you there, and older bookmarks keep working.",
        "Reset Configuration now brings the router back with its factory settings at 192.168.80.1. Keeping the current LAN address is still available as an option in the reset window.",
        "Access points cabled to Hotspot ports get an address again on their own after a power cut: once the Hotspot is ready, the router restarts those ports for a moment so the access points ask again (RB951 routers).",
        "A phone that once got a LAN address no longer keeps it while on the Hotspot: at its next renewal it is moved to the Hotspot network.",
        "Load Balance: any port can now be chosen for a new Internet line; the router takes it out of its bridge for you (never the port you are connected through).",
        "The Log keeps days of history instead of about two hours: routine background downloads are no longer written to it.",
        "PPPoE: a damaged disconnect message can no longer keep the router busy for half a minute, management keeps working with many hundreds of sessions, and changing a plan's speed with many users online no longer restarts PPPoE.",
        "Changing queues no longer removes the speed limits of PPPoE, Hotspot or load balancing.",
        "The management connection used by billing panels stays available when many connections open at once.",
        "Security: accounts with limited rights can no longer gain full control through the web Terminal or web actions.",
        "Terminal: almost every page in the menu can now be managed from the Terminal, with the same checks as the page.",
        "Firmware updates are started in a safer way."
      ]
    },
    {
      "version": "1.0.8-rc35",
      "date": "2026-11-12",
      "summary": "FreeISP OS 1.0.8-rc35 brings about a hundred stability and security fixes, quicker recovery of access points after a power cut and a much fuller Terminal.",
      "notes": [
        "Access points cabled to Hotspot ports get an address again on their own after a power cut: once the Hotspot is ready, the router restarts those ports for a moment so the access points ask again (RB951 routers).",
        "A phone that once got a LAN address no longer keeps it while on the Hotspot: at its next renewal it is moved to the Hotspot network.",
        "Load Balance: any port can now be chosen for a new Internet line; the router takes it out of its bridge for you (never the port you are connected through).",
        "The Log keeps days of history instead of about two hours: routine background downloads are no longer written to it.",
        "PPPoE: a damaged disconnect message can no longer keep the router busy for half a minute, management keeps working with many hundreds of sessions, and changing a plan's speed with many users online no longer restarts PPPoE.",
        "Changing queues no longer removes the speed limits of PPPoE, Hotspot or load balancing.",
        "The management connection used by billing panels stays available when many connections open at once.",
        "Security: accounts with limited rights can no longer gain full control through the web Terminal or web actions.",
        "Terminal: almost every page in the menu can now be managed from the Terminal, with the same checks as the page.",
        "Firmware updates are started in a safer way."
      ]
    },
    {
      "version": "1.0.8-rc33",
      "date": "2026-11-04",
      "summary": "FreeISP OS 1.0.8-rc33 makes load balancing smarter and much more robust.",
      "notes": [
        "Recommended split: the router measures each Internet line's speed and delay, shows which line is better and recommends a split (for example wan2 92 % / wan 8 %), with one click to apply it. A warning appears when the shares you set contradict the measured speeds.",
        "Automatic shares (optional): the split follows the measured line speeds, changed at most every 15 minutes.",
        "Main line: choose which line carries the router's own traffic, its VPNs and the networks outside load balancing; the recommendation can suggest the fastest stable line.",
        "Proportional maximum-rate limits (optional, off by default): hold each line to its share of the total; this can slow the faster line and covers all of a line's traffic.",
        "Line checks every 10 seconds instead of 2 (a fifth of the probes); a line that stops answering is still taken out of use in about 15 seconds and comes back about 10 seconds after it answers again.",
        "Settings are saved immediately and applied in the background, with a visible \"applying\" state instead of a timeout on a busy router.",
        "With load balancing Off and several lines, the router always keeps one working default route.",
        "Share changes for several lines are applied as one change.",
        "Route gateway checks are tied to their own line, and hidden routes are restored reliably.",
        "Live counters that cannot be read show \"—\" instead of old values.",
        "The Firmware Update page explains storage-format updates in plain words instead of a raw error."
      ]
    },
    {
      "version": "1.0.8-rc32",
      "date": "2026-11-04",
      "summary": "FreeISP OS 1.0.8-rc32 improves the Load Balance page and makes the router more robust under heavy traffic.",
      "notes": [
        "Load Balance (renamed from Internet lines): a card for each Internet line with its share, live use, speed and delay; a clearer Add Internet line form (Automatic, PPPoE or Static, like Quick Set); and a traffic split bar for the last 10 seconds that no longer jumps to 0 on quiet seconds.",
        "Load balancing switch: On, Backup only (one line at a time, the next takes over when it fails) or Off, with a confirmation before it changes.",
        "Quick Set always shows the first Internet line (WAN1) exactly as before; extra lines are set up on the Load Balance page.",
        "Balance traffic from now lists every bridge, including the Hotspot bridge and bridges you add later, with their cable ports and Wi-Fi networks.",
        "Stability: three fixes from the Linux 6.12 stable series to the fast forwarding path, which could crash under heavy traffic on dual-core routers.",
        "If the kernel ever crashes, the router now restarts itself through its hardware watchdog instead of risking a hang.",
        "Kernel crash messages can be sent to a PC on the network for diagnosis (off by default)."
      ]
    },
    {
      "version": "1.0.8-rc31",
      "date": "2026-11-03",
      "summary": "FreeISP OS 1.0.8-rc31 brings built-in load balancing and failover for routers with two or more Internet lines.",
      "notes": [
        "Internet lines (new page): add a second or third Internet line (DHCP, static or PPPoE) with a short wizard. Main lines share traffic by the percentages you set (any split that adds up to 100 %); backup lines take over only when the lines before them fail.",
        "Live use: the page shows how much of the traffic each line carries right now, out of 100 %, next to the share you set, updated every second.",
        "Failover: a line that stops answering is taken out of use in about 7 seconds and put back about 10 seconds after it answers again. Running calls and downloads stay on their line when the main line returns.",
        "Balance traffic from: choose which customer networks (bridges, ports, VLANs, Hotspot, PPPoE customers) are balanced; networks not ticked use the main line, and its backup if it fails.",
        "The router's own VPNs always use the first Internet line, move to the backup only while it is down, and move back when it returns.",
        "Pasted multi-line scripts (route distance, check-gateway, per-connection classifier recipes, netwatch with startup-delay) are mapped onto Internet lines when imported.",
        "A router with one Internet line works exactly as before.",
        "Script import from the ISP panel: the backup reserve is now at least 1 MB, failed downloads show the address and reason, and a PPP pool can be replaced inside an import."
      ]
    },
    {
      "version": "1.0.8-rc29",
      "date": "2026-11-02",
      "summary": "FreeISP OS 1.0.8-rc29 brings a clearer VPN log, keeps a refused VPN from disturbing the rest of the router, and protects schedules against power cuts.",
      "notes": [
        "VPN log: each VPN shows short, plain reasons (for example \"could not connect - connection refused\" or \"authentication failed - wrong username or password\"); routine OpenVPN output is no longer shown as errors, and repeated failures are collapsed into one line per minute.",
        "A VPN server that refuses the router no longer makes the router restart its other VPNs or reconnect the WAN; only that VPN keeps retrying.",
        "Schedules survive a power cut: the router keeps a last good copy of its schedule list and restores it if the list is damaged, so scheduled scripts keep running.",
        "From 1.0.8-rc28, for routers that skipped it: on an RB951, Wi-Fi now starts on the first start after a reset or fresh install without a reboot, and Quick Set shows \"WiFi is starting\" while the Wi-Fi driver loads.",
        "From 1.0.8-rc28, for routers that skipped it: RB951G online updates work again; rc26 refused the RB951G update information as 'for a different flash type'. RB951G routers on rc26 need this update uploaded once on the Firmware page."
      ]
    },
    {
      "version": "1.0.8-rc28",
      "date": "2026-11-02",
      "summary": "FreeISP OS 1.0.8-rc28 fixes online updates on the RB951G and starts Wi-Fi on the first start after a reset or fresh install.",
      "notes": [
        "RB951G: online updates work again; rc26 refused the RB951G update information as 'for a different flash type'. RB951G routers on rc26 need this update uploaded once on the Firmware page.",
        "Wi-Fi now starts on the first start after a reset or a fresh install, without a reboot.",
        "Quick Set shows \"WiFi is starting\" while the Wi-Fi driver loads."
      ]
    },
    {
      "version": "1.0.8-rc27",
      "date": "2026-11-02",
      "summary": "FreeISP OS 1.0.8-rc27 fixes online updates on the RB951G.",
      "notes": [
        "RB951G: online updates work again; rc26 refused the RB951G update information as 'for a different flash type'. RB951G routers on rc26 need this update uploaded once on the Firmware page."
      ]
    },
    {
      "version": "1.0.8-rc26",
      "date": "2026-11-02",
      "summary": "FreeISP OS 1.0.8-rc26 brings the RB951Ui up to date: a new factory address of 192.168.80.1, its own update feed for RB951Ui units with Samsung flash, device names in Hotspot and DHCP, and a Hotspot management fix.",
      "notes": [
        "New factory address: a newly installed router, or one reset without \"Keep LAN address\", now starts at http://192.168.80.1 (DHCP 192.168.80.100-199). Routers that update keep their current address and settings.",
        "An upstream modem on 192.168.0.x on the WAN side no longer overlaps the factory network.",
        "RB951Ui with Samsung flash: the router recognises its flash storage, shows it as Flash Storage on the Firmware Update page and checks its own update feed, so it only ever receives images built for its flash. Normal RB951Ui units use the normal feed and refuse Samsung images.",
        "Hotspot Active and Hosts show device names reported over DHCP, and DHCP log lines include the device name.",
        "Firewall rules that accept traffic from any source no longer open a Hotspot bridge to router management while the Hotspot engine is stopped.",
        "Log: routine first-boot messages (the boot list of known bad flash blocks, the missing random seed before it is saved, the empty DNS server list before the WAN is up) are hidden once the line that settles them appears.",
        "Checked by a settings-keeping update from 1.0.8-rc21 to 1.0.8-rc26 on our RB951Ui test router: settings, LAN address and password were kept, the web page and updates worked, and the log showed no errors."
      ]
    },
    {
      "version": "1.0.8-rc23",
      "date": "2026-11-01",
      "summary": "FreeISP OS 1.0.8-rc23 is for the RouterBOARD 951G-2HnD only. It adds a tested installation path for units with the GD9FU1G8F3A NAND chip.",
      "notes": [
        "RB951G: correct NAND identification, data error correction and boot-area format for the GD9FU1G8F3A chip (ID c8f1801942), with the firmware writer and upgrade script kept in place for later updates.",
        "RB951G: fixed a boot wrapper fault that could stop the router starting after a write to NAND.",
        "Checked by a full install and normal NAND boot on one RB951G with this chip. Other NAND chips are not yet qualified for automatic installation.",
        "Also includes from shared source: device names on Hotspot Active and Hosts and in DHCP log lines, and firewall rules open from any source no longer open a Hotspot bridge while the Hotspot engine is down.",
        "Other router models stay on 1.0.8-rc21."
      ]
    },
    {
      "version": "1.0.8-rc21",
      "date": "2026-10-31",
      "summary": "FreeISP OS 1.0.8-rc21 cuts the CPU used by panel jobs, API polling and Hotspot user changes, moves shaped PPPoE uploads onto the fast path, and fixes a Hotspot problem that could lock you out of the router.",
      "notes": [
        "Panel jobs: about 23% down to about 5% busy over a 5-minute cycle on an otherwise idle router with a full log. The log upload no longer rereads the whole log for each line. Routers with few Hotspot log lines gain less.",
        "API: polling system resource once a second costs about 22 points less. Web page visits every 10 seconds cost about 11 points less.",
        "Hotspot users: adding a user at 3000 users takes about 0.5 s instead of 3.5 s. Buying again on a name the router already knows takes about 0.9 s instead of 6.6 s. Undo of an add now works at any user count.",
        "PPPoE: shaped uploads now use the fast path, saving about 7 points at about 900 packets per second in our test. Rate limits were unchanged. This does not change the cost of Hotspot traffic: at 25 Mbit of Hotspot traffic, total CPU is only about 2-4 points lower than 1.0.8-rc19.",
        "Hotspot: a server whose hotspot-address is missing no longer cuts off router management on a LAN bridge after a reboot. Clients stay without internet until it is fixed, and the Hotspot page shows the reason.",
        "Hotspot: with two servers, removing the running one now moves to another enabled server unless that server's interface carries a PPPoE server. Disabling the running one stops the Hotspot and starts nothing else. Enabling a server yourself starts it.",
        "Hotspot: a logged-in, shaped device can no longer get DHCP replies past the DHCP guard.",
        "Hotspot: a logged-in device with a remembered cookie keeps it through more changes; cookies end on a password change, disable or removal.",
        "Hotspot: Active shows the address the session really uses, and several devices can share an address. Bindings apply on the device's own address.",
        "Hotspot: walled garden and DNS after login corrected; a missing HTML folder or a bad setting no longer stops the server from starting; a second server stays stored and inactive; dns-name can change without a restart unless HTTPS is on.",
        "Hotspot: session timeout wording and idle time corrected; limit-uptime overrides session timeout.",
        "Hosts: excluded devices are now listed, with how each was found.",
        "Interfaces: Hotspot users no longer appear as rows. PPPoE users stay.",
        "Logs: the \"DHCP guard on\" line appears once per engine run instead of at every port change.",
        "API: a stuck or crashed API helper frees its slot and writes one log line. A log find followed by get returns the row the find saw."
      ]
    },
    {
      "version": "1.0.8-rc19",
      "date": "2026-10-30",
      "summary": "FreeISP OS 1.0.8-rc19 lowers CPU use on the RB951Ui by about a quarter under Hotspot load, fixes a memory leak in the API service, and logs DHCP lease expiry.",
      "notes": [
        "RB951Ui: the network driver no longer takes an interrupt for every burst of packets. In our tests with 20 and 60 Hotspot users at about 42 Mbit/s, CPU use fell from about 50% to about 37-43%, with the same speed and speed limits. Ping under load rises by about 1.5 ms.",
        "API: fixed a slow memory leak in the API service. Most API requests lost a small block of memory, which mattered most on low-memory routers.",
        "API: fixed an API service crash on a malformed Netwatch reply.",
        "DHCP: an expired lease now writes \"<server> deassigned <ip> from <MAC>\" in the log, within about a second of expiry. If the device returns, it gets a new \"assigned\" line. Renewals still write nothing.",
        "CPU display: CPU load reported to the panel and other API clients now follows the same display as the web interface. Scripts on the router still read the measured value.",
        "Terminal: /tool profile shows CPU the same way as Support > Profile.",
        "Interfaces: internal queue helpers (fq...) no longer appear in Interfaces or in interface pickers. An interface you name yourself starting with \"fq\" can now be shaped by queues.",
        "Every RB951 startup log is quieter: the \"records in/out\" lines from the Wi-Fi calibration step are gone.",
        "Releases: the build now stops if anything already built into an earlier release has gone missing.",
        "Hotspot: a device waiting to be signed in again stays on hold for the full time. Before, a renewed hold could end early and the phone briefly showed \"Connected without internet\".",
        "API: an account that changes its own group, allowed addresses or password keeps its current API connection. Removing or disabling it, or lowering its rights, still ends the connection.",
        "Logs: adding or changing a user or user group over the API writes one log line instead of two.",
        "Terminal: CPU figures in the Terminal follow the same display as the header.",
        "Updates: settings-keeping updates no longer carry the router's startup caches, which are rebuilt at first boot. This saves space on 16 MB routers and applies to updates installed from this version onward."
      ]
    },
    {
      "version": "1.0.8-rc18",
      "date": "2026-10-30",
      "summary": "FreeISP OS 1.0.8-rc18 makes Hotspot sign-in steadier, keeps the panel's API connection open when it updates its own account, logs user changes once, and makes settings-keeping updates lighter.",
      "notes": [
        "Hotspot: a device waiting to be signed in again (for example a remembered phone rejoining) now stays on hold for the full time. Before, a renewed hold could end early and the phone briefly showed \"Connected without internet\" during sign-in.",
        "API: an account that changes its own group, allowed addresses or password keeps its current API connection, as on other routers of this kind. Removing or disabling it, or lowering its rights, still ends the connection.",
        "Logs: adding or changing a user or user group over the API writes one log line instead of two, and the line names the right account.",
        "Terminal: CPU figures in the Terminal follow the same display as the header.",
        "Updates: settings-keeping updates no longer carry the router's startup caches (DHCP/DNS, firewall and network), which the router rebuilds itself at first boot. This saves space on 16 MB routers and applies to updates installed from this version onward.",
        "This release was checked with targeted tests of the changed features and on our RB951 test router."
      ]
    },
    {
      "version": "1.0.8-rc17",
      "date": "2026-10-30",
      "summary": "FreeISP OS 1.0.8-rc17 makes the Hotspot work better with customers' home routers on the network: phones are no longer mistaken for routers, the router no longer interferes when a phone accepts another router's address, and a phone that changes address is served straight away.",
      "notes": [
        "DHCP: when a phone accepts an address from another router on the Hotspot (for example a Tenda in router mode), this router no longer sends it a refusal for that choice. Before, the refusal could make the phone start over again and again. Requests for an address from the wrong network are still refused, as before.",
        "Hotspot: a phone that asks for its gateway and another device on its network is no longer mistaken for a home router and excluded for 12 hours.",
        "Hotspot: a phone that moves from this router's address to a home router's address is served at once, instead of waiting for its old session to end.",
        "Hotspot: when a DHCP lease changes quickly, the router no longer keeps a pool address that is now given to someone else.",
        "Logs: the \"clock set forward\" line now appears when the router corrects its clock at startup.",
        "This release was checked with targeted tests of the changed features and on our RB951 test router."
      ]
    },
    {
      "version": "1.0.8-rc16",
      "date": "2026-10-30",
      "summary": "FreeISP OS 1.0.8-rc16 serves Hotspot customers whose phones got an address from another router (for example a customer's home router on a Hotspot port), no longer signs everyone out when a package is bought, gives small Wi-Fi plans their full speed and keeps the log to one line per device.",
      "notes": [
        "Hotspot: devices that hold an address from another router on the network (for example a Tenda in router mode on a Hotspot port, handing out 192.168.0.x) are now served like any other client: they see the login page, can sign in and buy, and use the Internet. Hosts shows the device's own address and the pool address it uses (to-address). Before, these phones showed \"Connected without internet\".",
        "Hotspot: the home routers themselves are recognised as gateways and are not taken in as customers. The router remembers them across restarts.",
        "Hotspot: a phone that also uses mobile data is no longer signed in and out repeatedly under a second address.",
        "Hotspot: adding a user or plan while the Hotspot is busy (for example a purchase from the panel) no longer restarts the Hotspot. Before, every signed-in customer could lose service for up to a minute.",
        "Hotspot: on the router's own Wi-Fi, plans of a few Mbit/s now reach about 85-95% of their speed instead of about half.",
        "Logs: \"assigned <ip> to <MAC>\" is written once per device. Renewals and repeated answers no longer add lines.",
        "Logs: blocked DHCP answers from other devices are still blocked but are no longer shown in the normal log (they are visible with a debug logging rule).",
        "Scripts: a scheduled script could crash on some dates while printing the log; this is fixed. A script that is stopped by the system is now logged as such.",
        "Wi-Fi: after a restart the Wi-Fi starts once the Hotspot is ready, and the firewall is loaded once instead of twice during startup.",
        "Lower CPU use for API logins and for scheduled scripts that read the log.",
        "CPU figures on the Diagnostics, Bandwidth Test and Support pages now match the header.",
        "This release was checked with targeted tests of the changed features and on our RB951 test router."
      ]
    },
    {
      "version": "1.0.8-rc15",
      "date": "2026-10-29",
      "summary": "FreeISP OS 1.0.8-rc15 hands out addresses at once on busy networks, shows phones a \"Sign in\" prompt as soon as their Hotspot package ends, blocks customers' home routers from handing out addresses on the Hotspot, and makes Wi-Fi port changes take seconds instead of a minute.",
      "notes": [
        "DHCP: addresses are handed out at once. Before, the server pinged each new address and waited up to 3 seconds before offering it, one client at a time, so after a reboot on a network with 90+ devices clients queued for minutes and many gave up or took another device's answer. The limit on active leases is raised to 4000.",
        "Hotspot: when a package ends (time or data used up, logout, kicked or disabled), Android phones show \"Sign in to network\" within seconds, also behind access points on the ports. No Wi-Fi disconnect is used.",
        "Hotspot: a device signed in again by cookie from its connectivity check no longer briefly shows \"Connected without internet\".",
        "Hotspot: plans with Shared users 0 are accepted and mean unlimited (before, the panel's plan sync failed with \"shared-users must be 1 to 1000\").",
        "Hotspot: DHCP answers from other devices on the Hotspot (for example a customer's home router plugged in by its LAN port) are blocked before they reach the router's Wi-Fi clients, and the log shows \"dhcp alert on hotspot-bridge: DHCP server <MAC> (<ip>) blocked\". Devices plugged into two ports of the same switch can still reach each other directly.",
        "Wi-Fi: moving the router's Wi-Fi to another bridge (Add Ports) now takes effect in about 10 seconds with one radio restart. Before, it could stay on the old network for about a minute and devices joining then got a LAN address.",
        "Wi-Fi: the built-in watchdog restarts the router's own Wi-Fi radio if nearby devices keep failing to join, or if the Wi-Fi service stops responding (log line \"Wi-Fi ... restarting\").",
        "Wi-Fi: devices far from the router stay connected longer (slow 1-11 Mbps rates allowed, no disconnect on missed acknowledgements). Settings you changed yourself are kept.",
        "Logs: refused DHCP requests are shown (for example \"hotspot-dhcp refused 192.168.0.128 to <MAC>: wrong network\"), and a full address pool is a warning.",
        "Scripts: the panel's binding speed-cap heal script no longer fails with \"no such item (/queue/simple/get; line 4)\".",
        "Interfaces: an unplugged switch port no longer shows as running at 1000 Mbps.",
        "Quick Set: with Automatic or PPPoE Internet, an empty DNS field uses the DNS servers from your provider and shows them.",
        "The CPU reading in the header is labelled just \"CPU\".",
        "This release was checked with targeted tests of the changed features and on our RB951 test router."
      ]
    },
    {
      "version": "1.0.8-rc13",
      "date": "2026-10-29",
      "summary": "FreeISP OS 1.0.8-rc13 keeps Hotspot, PPPoE and the panel VPN running by themselves, makes returning Hotspot customers connect without signing in again, and stops panel uploads from failing.",
      "notes": [
        "Self-repair: a built-in watchdog keeps the Hotspot, the PPPoE server and the panel VPN running. If the router has Internet but the VPN has passed no data for 3 minutes, it reconnects it by itself (no reboot needed). The log shows lines such as \"Hotspot started\" and \"VPN freeispradius is back up\". The VPN also reconnects as soon as the WAN comes back.",
        "Hotspot: a customer whose device logged in before and whose package is still active is logged in again as soon as the device joins the Wi-Fi, without the Sign-in page (needs cookie login in the user profile, as the panel sets it).",
        "Hotspot: a phone that reconnects with a new address is no longer refused with \"no more sessions are allowed\" because of its own old session.",
        "Panel uploads: portal files uploaded by FTP no longer stall or fail (\"nf_ct_ftp: cannot add expectation\"), and a failed upload never leaves an empty file. Panel data uploads (heartbeats, purchases) are queued instead of skipped.",
        "Installer Add Ports works on RB951Ui, RB951G and Xiaomi.",
        "Profile names with emoji (for example \"Silver 🥈\") work for Hotspot and PPPoE.",
        "The VPN interface can be disabled and enabled from the Interfaces page.",
        "The clock is set as soon as the Internet is reachable after a power cut.",
        "Logs: DHCP servers show their real names (for example hotspot-dhcp); routine panel schedule lines are hidden; PPPoE logs why a connection request was not answered.",
        "Menus: Backup is in Files; Reboot and Reset Configuration have their own entries under System. The board name now shows \"FOS\" (for example RB951Ui-2HnD FOS).",
        "Several API logins at once are no longer refused.",
        "This release was checked with targeted tests of the changed features and on our RB951 test router."
      ]
    },
    {
      "version": "1.0.8-rc12.g1",
      "date": "2026-10-28",
      "summary": "RB951G storage compatibility update",
      "notes": [
        "Recognizes the affected storage chip using its complete identification code.",
        "Adds detailed storage-identification logs to help diagnose installation failures.",
        "Both temporary installation and permanent firmware include the correction; customer hardware validation is still pending."
      ]
    },
    {
      "version": "1.0.8-rc11",
      "date": "2026-10-28",
      "summary": "FreeISP OS 1.0.8 makes the Interfaces page update every second, stops a red Log line from the ISP Ledger panel, and adds the RB951G.",
      "notes": [
        "Interfaces: traffic counters update once a second with fresh readings, and the columns keep their width while the numbers change. PPPoE client rows (<pppoe-USER>) show the client's MAC address.",
        "The panel's removal of a Hotspot user that no longer exists no longer adds a red \"provide numbers, .id or name\" line to the Log.",
        "Lower router CPU use from the web pages: open Firewall and Log tabs share their first reads instead of each tab reading on its own.",
        "Cudy WR1300: the ISP Ledger auto install \"Add Ports\" step moves LAN ports into hotspot-bridge. On the RB951Ui, RB951G and Xiaomi 4A this panel step is still refused for ports on the built-in switch (\"custom switch VLAN layout\"); that fix is in the next release. Moving ports on the Bridge page works on every router.",
        "RouterBOARD 951G-2HnD now gets the same releases as the other routers.",
        "Routers that were on rc6 (Xiaomi 4A, Cudy WR1300, RB951G) also get the rc7-rc9 changes: Hotspot no longer refuses a phone that reconnects with a new random Wi-Fi address because of its own old session, and login failures are information lines instead of red errors; Bridge page fixes (a removed port is offered again, no \"Reload site?\" prompt, the tab is kept); the WAN port cannot be moved into a bridge by mistake; the Cudy internal switch link (eth0) is no longer offered as a bridge port; Wi-Fi name or security changes restart the radio; quieter remote-access VPN log; panel backups kept on the 128 MB RB951G.",
        "This release was checked with targeted tests of the changed features only. RB951G, Xiaomi and Cudy were not tested on hardware for these changes."
      ]
    },
    {
      "version": "1.0.8-rc9",
      "date": "2026-10-27",
      "summary": "FreeISP OS 1.0.8 lets a phone that changed its Wi-Fi address log in again, and finishes the Bridge page fixes.",
      "notes": [
        "Hotspot: a phone that reconnects with a new (random) Wi-Fi address is no longer refused with \"no more sessions are allowed\" because of its own old session. If the old device no longer answers, its session is closed (\"replaced by login from ...\") and the new login goes through; a voucher used on a second phone that is still connected is still refused.",
        "Hotspot login failures (wrong password, no more sessions) are normal information lines in the Log, not red errors.",
        "Bridge page: a port removed from a bridge appears again under New Bridge Port; after applying a change the page stays on the same tab and no longer asks \"Reload site?\".",
        "Xiaomi 4A: the WAN port cannot be moved into a bridge by mistake. Cudy WR1300: the internal switch link (eth0) is no longer offered as a bridge port.",
        "Includes everything in rc8: moving LAN ports into the Hotspot bridge, backups kept on the RB951, full Wi-Fi restart when the name changes, quieter VPN log, hourly error reports, Hotspot keepalive timeout.",
        "This release was checked with targeted tests of the changed features only."
      ]
    },
    {
      "version": "1.0.8-rc8",
      "date": "2026-10-27",
      "summary": "FreeISP OS 1.0.8 fixes moving LAN ports between bridges and keeps backups on routers with large flash.",
      "notes": [
        "RB951: moving a LAN port (for example ether4 or ether5) into the Hotspot bridge works again; it no longer fails with \"Port eth0.2: no such interface\". The Bridge page shows only the interface, bridge and link, without internal switch details.",
        "The RB951 (128 MB flash) is no longer treated as a small-flash router: panel backups are saved and updates keep pictures in Files. On 16 MB routers a declined panel backup is a normal information line, not a red error.",
        "Changing a Wi-Fi network's name or security now fully restarts the radio, so phones can join the renamed network straight away.",
        "The remote-access VPN no longer logs red errors on every connect.",
        "Includes everything in rc6: hourly error reports (switch on the Firmware page), Hotspot keepalive timeout, no \"mesh teardown error\".",
        "This release was checked with targeted tests of the changed features only."
      ]
    },
    {
      "version": "1.0.8-rc6",
      "date": "2026-10-27",
      "summary": "FreeISP OS 1.0.8 sends hourly error reports so problems can be found and fixed faster.",
      "notes": [
        "Once an hour the router sends new error and warning lines from its log to the FreeISP update server. Passwords and keys are removed, and customer login failures are only counted. Turn it off on the Firmware page (\"Send error reports to FreeISP (hourly)\").",
        "Includes everything in rc5: Hotspot keepalive timeout (2 minutes when a profile sets none) and no more \"mesh teardown error\" in the Log.",
        "This release was checked with targeted tests of the changed features only."
      ]
    },
    {
      "version": "1.0.8-rc5",
      "date": "2026-10-27",
      "summary": "FreeISP OS 1.0.8 logs out Hotspot users who have left and fixes a recurring Log error.",
      "notes": [
        "Hotspot users whose device has left (no traffic and no answer for the keepalive time) are now logged out with \"keepalive timeout\". A profile that does not set a keepalive time uses 2 minutes; \"none\" turns it off.",
        "The panel's 15-minute mesh check no longer logs \"mesh teardown error\": scripts run by the router can read routing tables again.",
        "Includes everything in rc4: first-try panel installs, no backups stored on small routers, instant Wi-Fi bridge moves.",
        "This release was checked with targeted tests of the changed features only."
      ]
    },
    {
      "version": "1.0.8-rc4",
      "date": "2026-10-27",
      "summary": "FreeISP OS 1.0.8 makes panel installs work the first time and keeps small routers safe.",
      "notes": [
        "The ISP Ledger install script now works on the first try on a new router (it no longer stops with \"router configuration changed after staging\").",
        "Routers with small storage no longer save backups on the router; the panel's backup request is declined, and the Backup page downloads a backup straight to your computer.",
        "Moving a Wi-Fi network to the Hotspot or another bridge now takes effect at once, and the Bridge page shows when a Wi-Fi restart is still pending.",
        "The first start after installing checks that its data was saved to flash and logs a clear result.",
        "Fewer routine start-up lines on the Log page.",
        "This release was checked with targeted tests of the changed features only."
      ]
    },
    {
      "version": "1.0.8-rc3",
      "date": "2026-10-26",
      "summary": "FreeISP OS 1.0.8 makes updates safe on small routers and keeps the fast start-up on every model.",
      "notes": [
        "Fast start-up on every model: the web page and DHCP come up first, Wi-Fi and other services follow in the background.",
        "Updates on 16 MB routers check first that your kept settings fit; pictures and temporary files in Files are not kept and are listed before you install, so nothing else can be lost.",
        "A first start after an update can no longer lose settings or reset the router on the next restart.",
        "64 MB routers free memory automatically during Download & Install, so updates no longer need manual steps.",
        "Only the FreeISP look: no other theme or fallback page.",
        "One calm \"restarting\" screen during updates instead of error messages.",
        "The Log page hides routine start-up messages; WAN, DHCP, logins, warnings and errors stay visible.",
        "The Bridge page is simpler and lists each Wi-Fi port once.",
        "Default Hotspot login pages come back automatically if they are missing.",
        "New: Cudy WR1300 V3 image (use only on a V3; label shows version 3.0).",
        "This release was checked with targeted tests of the changed features only."
      ]
    },
    {
      "version": "1.0.8-rc2",
      "date": "2026-10-26",
      "summary": "FreeISP OS 1.0.8 now supports the Cudy WR1300 (hardware version V2).",
      "notes": [
        "First FreeISP image for the Cudy WR1300 V2: dual-band Wi-Fi, five Gigabit ports, Hotspot, PPPoE, firewall and queues.",
        "Fast start-up: the web page and DHCP come up first; Wi-Fi and the other services follow in the background.",
        "Install from the Cudy firmware once through Cudy's signed intermediate firmware, then install FreeISP; later updates are online from the Firmware page.",
        "Only for hardware version V2; do not install it on a V1 or V3.",
        "This release was checked with targeted tests of the changed features only."
      ]
    },
    {
      "version": "1.0.7",
      "date": "2026-10-26",
      "summary": "FreeISP OS 1.0.7 keeps the router clock right after a restart and uses East Africa Time by default.",
      "notes": [
        "Routers without a battery clock now start with the correct date range after a restart, so online updates no longer fail with a certificate error while the clock is still wrong.",
        "The router sets its clock as soon as the Internet connection comes up, instead of waiting for the next retry.",
        "If the clock is still not set, Check For Updates now says so plainly and asks you to try again in a minute.",
        "The default time zone is now East Africa Time (GMT+3). Routers still on the old default (UTC) switch once during this update; a time zone you chose yourself is kept.",
        "This release was checked with targeted tests of the changed features only."
      ]
    },
    {
      "version": "1.0.6",
      "date": "2026-10-25",
      "summary": "FreeISP OS 1.0.6 adds a guided way to put the factory firmware back on supported routers.",
      "notes": [
        "New Restore original tab on the Firmware page: it checks the router and starts a one-time recovery boot, so you no longer need to hold the Reset button.",
        "A 45-second countdown shows when to move the PC cable to the recovery port. The recovery installer on your PC then installs the factory firmware.",
        "The recovery boot runs only once, only on the exact router it was started for, and never alongside a firmware update.",
        "This release was checked with targeted tests of the changed features only."
      ]
    },
    {
      "version": "1.0.4-rc9",
      "date": "2026-10-24",
      "summary": "Much lower idle CPU with billing-panel schedules, faster hotspot logins and fixed MAC addresses on the RB951.",
      "notes": [
        "Scheduled scripts that fetch from a billing panel reuse one secure connection and read only new log lines: idle CPU on our test router fell from about 34% to about 9%, with the panel schedules unchanged.",
        "Script fix: find with a pattern (for example find topics~\"info\") without the word where now matches only the right items. Before, it matched every item, so a panel setting could not hide fetch lines from the log.",
        "Uploads to a panel that a script does not check run in the background, so scripts finish sooner.",
        "Hotspot: 50 users arriving together all log in on the first try, logins no longer start helper programs, and the per-user traffic filters cost the same for any number of users.",
        "The Ethernet and bridge MAC addresses no longer change on every restart.",
        "Reset Configuration now returns the router to the FreeISP defaults at 192.168.0.1 (it could come back with plain defaults at 192.168.1.1), shows the address before you confirm, and can keep the LAN address.",
        "The Interfaces page shows live traffic rates for PPPoE sessions every second.",
        "This release was checked with targeted tests and on an RB951Ui-2HnD (idle CPU, PPPoE, hotspot logins, MAC addresses across restarts)."
      ]
    },
    {
      "version": "1.0.4-rc8",
      "date": "2026-10-24",
      "summary": "Faster PPPoE forwarding and a lighter web interface on the RB951.",
      "notes": [
        "PPPoE: established connections now take the fast forwarding path, so a busy router stays responsive.",
        "Network driver: no more copying of every PPPoE packet on a bridge that also has Wi-Fi, and packets are handled in batches instead of one interrupt each. In our 50-session test at 90 Mbit/s PPPoE download, CPU fell from about 73% to about 35-45%.",
        "Under load the router waits up to 1 ms to collect packets before handling them; this saves CPU and adds about 1-2 ms of delay.",
        "Web interface: pages load only the parts you open, refresh less often and show the last data immediately, so opening pages no longer spikes the CPU.",
        "The CPU meter in the header updates every second.",
        "Fewer CPU spikes when the router is idle.",
        "The Backups page opens faster.",
        "Scheduled scripts that list sessions or read the log use much less CPU (for example a 50-session heartbeat: from about 18 s to under 1 s of CPU per run).",
        "Hotspot: when the last rate-limited user logs out, the router removes its traffic shaper from the port, so other traffic on that port no longer pays for it.",
        "Fixed: Reset Configuration failed with \"Backup service failed\".",
        "This release was checked with targeted tests and a 50-session PPPoE load test on an RB951Ui-2HnD."
      ]
    },
    {
      "version": "1.0.4-rc7",
      "date": "2026-10-23",
      "summary": "FreeISP OS 1.0.4-rc7 makes PPPoE faster and more compatible on small routers.",
      "notes": [
        "PPPoE clients that ask for \"any service\" now connect reliably.",
        "PPPoE sessions no longer drop during connection setup with some client devices.",
        "PPPoE now logs a clear reason when a connection is refused during setup.",
        "Much lower CPU use with many PPPoE customers online."
      ]
    },
    {
      "version": "1.0.4-rc5",
      "date": "2026-10-23",
      "summary": "A cleaner Log: short VPN entries and no harmless startup warnings.",
      "notes": [
        "VPN clients now log a few short lines with their name: connecting, encoding, connected and disconnected with the reason. Detailed VPN messages are still kept under the debug topic.",
        "Harmless startup messages from the network and Wi-Fi drivers no longer show in red or yellow when the router starts. They are kept under the debug topic.",
        "The PPPoE server shows \"served interface is down\" as an error only when users were disconnected.",
        "This release was checked with targeted tests of the changed log features only."
      ]
    },
    {
      "version": "1.0.4-rc4",
      "date": "2026-10-23",
      "summary": "Router uptime in the header and a clean reboot message.",
      "notes": [
        "The header now shows how long the router has been running, next to CPU and RAM.",
        "Rebooting from the web page no longer shows an error when the router restarts before answering.",
        "Reset Configuration starts at once and finishes in the background, so it no longer times out on a busy router.",
        "This release was checked with targeted tests of the changed features only."
      ]
    },
    {
      "version": "1.0.4-rc3",
      "date": "2026-10-23",
      "summary": "Reset Configuration no longer times out on busy routers.",
      "notes": [
        "Reset Configuration now starts at once and finishes in the background, so the page no longer shows a request timeout on a busy router.",
        "If the reset cannot be completed, the page now shows the reason and nothing is reset.",
        "This release was checked with targeted tests of the changed reset feature only."
      ]
    },
    {
      "version": "1.0.4-rc2",
      "date": "2026-10-23",
      "summary": "FreeISP OS 1.0.4 adds UEFI PC support and makes firmware updates more reliable.",
      "notes": [
        "Installs and boots on UEFI PCs as well as legacy BIOS PCs.",
        "Firmware updates no longer stop part-way on some systems; settings are kept.",
        "Updates refuse an image made for a different boot type instead of writing it.",
        "Support for RTL8153 USB network adapters."
      ]
    },
    {
      "version": "1.0.2",
      "date": "2026-10-22",
      "summary": "Safer updates and steadier panel connections.",
      "notes": [
        "Fixed \"Router services unavailable\" errors when several panel connections log in at the same time.",
        "After an update the router checks itself; if something important stops working, it restores the settings it had before the update, once.",
        "Hardware watchdog: a frozen router restarts by itself.",
        "Boot-loop protection: after repeated failed starts the router enters safe mode, keeps LAN management reachable and never reboots in a loop.",
        "PC/virtual machine images can keep two firmware copies and return to the previous one if a new version fails.",
        "Adding an item that already exists no longer writes a red error to the log.",
        "Quieter FTP log."
      ]
    },
    {
      "version": "1.0.1",
      "date": "2026-10-21",
      "summary": "Reliability fixes, simpler update channels and easier log copying.",
      "notes": [
        "The wireless interface can now be added to a bridge and changed like any other bridge port, including from your billing panel.",
        "More wireless settings can be managed remotely: comment, hidden network name, access list, band, channel and country.",
        "Log page: copy a single entry from its details window, or select several entries and copy them at once.",
        "Fewer false error lines in the log (refused file uploads and adding a name that already exists are no longer shown as errors).",
        "Updates now offer just two channels: Stable (recommended) and Development.",
        "Fixed the \"Router services unavailable\" message that could appear while the daily settings backup was running.",
        "Router services stay responsive under heavy load instead of refusing requests."
      ]
    },
    {
      "version": "1.0.0",
      "date": "2026-10-21",
      "summary": "First FreeISP OS release.",
      "notes": [
        "New FreeISP OS look with the FreeISP logo on the login page, sidebar and browser tab, and readable Day and Night themes everywhere.",
        "Undo and Redo for every configuration change, whether it was made in the web interface, the Terminal, the API or a script.",
        "Disabled items are shown greyed out on every list page.",
        "Terminal improvements: the session stays open, right-click copy and paste, and a pasted script can be undone in one step.",
        "Consistent interface names on the address, route, interface and status pages.",
        "The configuration change log names the exact item that was changed.",
        "Hotspot: removing a user keeps their accounting record complete; walled garden, profile and binding changes apply instantly.",
        "Billing panel setup and \"replace router\" can be run again cleanly.",
        "The file transfer password follows the API account password.",
        "Management access from your local network always works, independent of remote access restrictions.",
        "Fixed a switch setting that could lock you out of the local network.",
        "Faster start-up: the web interface and API are available sooner after boot.",
        "Online updates: signed update files, a free space check and a confirmation before installing.",
        "Updates keep all your settings and files.",
        "Reset to defaults clears the Files area but keeps your backups."
      ]
    }
  ]
}
